Hydraulic fluids · Technical sheet
Shell Tellus S2 MX 32
ISO VG 32 · HMMineral, API Group II
Anti-wear hydraulic fluid for systems that run in a steady temperature range.
- KV 40 °C
- 32 mm²/s
- KV 100 °C
- 5.4 mm²/s
- Flash point
- 220 °C
In the store from $159.00.
Use it for
- Industrial hydraulic systems
- Marine hydraulic systems where an ISO HM fluid is recommended
- Mobile hydraulics such as cranes, where ambient temperature does not swing widely
- Systems exposed to wide temperature swings: Shell recommends Tellus S2 VX.
Specifications and approvals
Standards
ISO 11158 (HM)DIN 51524-2 HLPASTM D6158 (HM)SS 15 54 34 AM
Equipment makers
Bosch Rexroth RDE 90245Parker Denison HF-0, HF-1, HF-2Danfoss Vickers E-FDGN-TB002-EFives (Cincinnati) P-68
Typical properties
| Kinematic viscosity at 0 °C | 340 mm²/s |
|---|---|
| Kinematic viscosity at 40 °C | 32 mm²/s |
| Kinematic viscosity at 100 °C | 5.4 mm²/s |
| Viscosity index | 105 |
| Flash point (COC) | 220 °C |
| Pour point | −30 °C |
| Water separation | 20 min |
| TOST life | ≥ 5,000 hASTM D943 |
| Density | 0.854 kg/l |
What Shell says it does
- Resists thermal and chemical breakdown and sludge.
- Stable with moisture, protecting against rust in humid conditions.
- Good filterability, air release and foam control; delivered to ISO 4406 20/18/15 or cleaner.
Compatible with most mineral hydraulic oils. Do not mix with environmentally acceptable or fire-resistant fluids.
Shell and the Shell product names are trademarks of the Shell group of companies. Approvals and specifications vary by region and data-sheet version; always check the pack and follow the equipment maker's manual. Online payment is currently unavailable; call or email the office to order.